Magnetic and Gravity Dynamics
Projects


Gravity Roller Wheel

Gravity Roller Wheel

This design is kept extremely unbalanced on the left side of the wheel. Four weighted rollers are always out on the left side of the wheel. Rollers are bearing mounted and must be large enough in diameter to turn freely inside the ramp in the compressed state. Click the link below for a enlarged gravity roller wheel drawing. Spring tension is kept to a minimum. Only enough tension is used to keep the rollers pushed out when they leave the ramp. #8 and #5 cancel. Will it work? I don't know.

Gravity Roller Wheel Drawing

SJack Gravity Wheel

[HOME] [PROJECTS] [CONTACT INFO]



Home
Projects
Contact Info
Magnetic and Gravity Dynamics
P.O. Box 389,
Panola,
Texas,
75685
United States
Tel: 1-903-766-3817
Built using ecBuilder.